Bulk Pinewood Derby Bodies Classic Slim Wedge 5 PACK
These Bulk Pinewood Derby Bodies Classic Slim Wedge 5 pack have the following atrributes:
*118-126 grams (Plenty of room for Factory or aftermarket ultralight wheels after painting and decals.)
*Center of Gravity=0.575″-1.100″
*Weight Pocket mass ratio = approximately 1:2 (rear to front)
*Rough finished to a 220 grit
*The lead weight is glued firmly in place.
*Front Wheels slots are notched to prevent wheel rub on body
*Front end is tapered to allow the body to sit (set?) higher on the starting pin. This may be advantageous depending on circumstances.
*Each body will be individually packaged and sealed
*Each Bulk Pinewood Derby Bodies Classic Slim Wedge 5 pack will come with a strip of foil tape to cover the weight pocket after assembly.
Pine is a fickle material. It is always recommended to pre drill the axle slots with a #44 bit before installing axles. Otherwise, you risk splitting the axle slot.
Each body is unique with its finishing. This is the nature of working with pine. Some bodies may have slight variations with the edges.
Lastly, you will not find a better deal on pinewood derby bodies. If you need a high axle slot drilled in each one, send me a message.
To minimize paper consumption, an invoice is not included with your order. Please specify at checkout if you need a tangible copy.