Pinewood Derby Custom Car build Process

/Pinewood Derby Custom Car build Process
Pinewood Derby Custom Car build Process 2018-09-08T07:56:14-04:00

Professional Pinewood Derby car building process by humble21creations:

First, the car is crafted on a CNC machine with hand selected blocks from the official BSA kit.

BAD BLOCKS

Afterwards, the rough cut body is weighed, measured, and inspected by the quality control team for inferior attributes.

professional pinewood derby car building process by humble21creations

Next, the inspection team sends the car to the finishing area for sanding and weight preparation.

professional pinewood derby car building process by humble21creations

Then the car is sent to the paint shop for 5 coats of primer, paint, and decals.

Finally, when the car is dry, it is inspected and sent to the tuning and assembly team.

Professional Pinewood Derby car building process by humble21creations

AXLES

Before an axle is used, it is inspected for defects.

First, the axle is finished to the desired finish with a diamond paste.

Second, all residual paste is removed.

Third, the axle is coated with teflon dry lubricant.

Afterwards, the axle is bent for desired camber.

Finally, the axle is merged with the prepped wheel for final spin test.

WHEELS

Before a wheel is used, it is inspected for defects.

First, the wheels are polished with a 3 step process.

Second, all residual polish that remains, is removed.

Third, the entire wheel is prepped with graphite.

Finally, the wheel is merged with the prepped axle to be spin tested

TUNING

First, weight is added and desired COG is found.

Next, the prepped wheels and axles are mounted to the car.

Third, a tuning board sets the steer axle drift.

Finally, the car is ran down the track for tuning and final adjustments.

As a result of these processes, the buyer will get the Fastest Pinewood Derby car! ¬†Furthermore, humble21creations Pinewood Derby car’s will give fast results for 10 races before more graphite should be applied.